Fan Art of the Spooky Pokemon Gengar - Hueforge design
A pokemon to share:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #002914 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2.1 #5e43b7 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5.1 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Green (10500) At layer #10 (0.88mm) swap to Purple (10700) At layer #18 (1.52mm) swap to Jade White (10100) for the rest.






















