Clean design. Fast drying. Made for everyday use.

This soap holder uses a raised honeycomb grid to keep soap dry between uses. Water drains into the base, reducing residue and extending the life of your soap.

The honeycomb grid is shaped to improve grip and help keep the soap in place while allowing water to drain.

The model is split into two parts: a base and a removable drainage tray. This makes it easy to clean and simple to print.

Designed in Fusion with a focus on function, clean geometry, and reliable printing.

Key Features Honeycomb drainage grid for airflow and water runoff Shaped grid improves grip and prevents the soap from sliding Reversible tray — flip upside down for a flat top surface Two-part design (base + removable tray) Fast-drying functionality Minimalist look for modern bathrooms Optimized for FDM 3D printing

Dimensions: Length: 100 mm Width: 60 mm Height: 20 mm

Print Settings (recommended) Material: PLA or PETG Layer height: 0.2 mm No supports required Standard infill (10–20%)

Note: Good first-layer adhesion is important for a clean honeycomb pattern. Ensure your bed is well-leveled and properly prepared.

Files Included soap-holder-base.stl soap-holder-drainage-tray.stl Notes Designed for smaller bar soaps for optimal fit and drainage Designed clearance between parts to compensate for FDM printing variation and ensure easy assembly Model has been test printed successfully