ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file. ..............................................................................

Hi Folks,

I finally saw the latest popular Dino movie 😏 and was pleased to see I have made a few dinos already (the Mosasaurus was definitely a favorite for me!) And now the DILOPHOSAURUS!!!

As usual, I created two head versions (with and without the eye) and a stand. I have also added an XL/Cut Version that needs to be glue together.

Files Included:

• 3MF Project files for the print-in-place and XL/Cut version (to be glued)
• Stls for the print in place and XL/Cut version (to be glued). Straight version, pop-on eye and no eye heads, frill and no frill bottom jaw option, 2 bones and a stand!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Happy Printing -Dan

P.S. If you like this design, Check out my other models.

https://www.myminifactory.com/users/FlexiFactory?show=store

Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.

Print tips and Info:

STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

I print with .12 or .16 layer height for quality.

As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.

I successfully test printed between 50% and 300% XL for this design. But I recommend 60% or larger for the dinos. If you print the minis, consider using the straight stl or 3mf for printability.

XL version must be GLUED together with Super Glue. I still suggest no supports, though you may have some "roughness" due to bridging on the underside of the rib bones or toes. This is the super glue I use for all my XL dinos: https://amzn.to/4lYylON

Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List

• 1st photo is 110% STL Stained and painted: Overture Matte PLA, Video Tutorial HERE
• 3rd photo is 100# 3MF: Cookiecad Mermaid, Overture White Rock, iSanmate Yellow/Green
• 4th photo has 100 and 110% 3MF and 60% stl: Cookiecad Mermaid, Ziro Rainbow, Flashforge Rainbow Candy, Geetch Bron Stone, Overture White Rock
• 5th photo has 115% and 80% stl: iSanmate Rainbow and Pink candy Green, Ziro Twilight