Fan art designs of Jojo's Bizarre Adventure character Jotaro Kujo
Model set 2 tonight:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #545454 PLA Bambu Labs Basic Dark Gray (10105) Transmission Distance: 1.4 #e4bd68 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 #ffffff PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Gray (10105) At layer #15 (1.28mm) swap to Gold (10401) At layer #20 (1.68mm) swap to Ivory White (11100) for the rest.
























