High-speed printing on the Ender-3 V3 Plus generates significant kinetic energy. While concrete pavers and rubber mats are the gold standard for vibration dampening, they are often abrasive. These low-profile riser feet are designed to bridge the gap between your machine and your dampening solution, protecting your hardware while optimizing airflow.

  The Silent Upgrade Your PSU Deserves Standard rubber feet can degrade when pressed directly against porous concrete over long periods. Additionally, the V3 Plus architecture benefits from every millimeter of extra clearance for bottom-mounted cooling. These risers provide a clean, stable interface that preserves your original rubber feet and ensures the electronics bay isn't suffocating against a flat surface.

• Preservation: Prevents the factory rubber feet from tearing or scuffing on rough stone surfaces. • Thermal Management: Increases the air gap beneath the printer to assist in heat dissipation during long-duration prints. • Stability: Designed with a snug tolerance to ensure no lateral shifting during high-acceleration travel. • Efficiency: A quick, support-free print that solves a long-term maintenance headache.   Print settings These have been torture-tested to handle the weight and movement of the Plus-sized frame.

• Material: PETG (Highly recommended for creep resistance and durability under weight). • Nozzle: 0.4mm • Layer Height: 0.2mm • Perimeters: 4 (Crucial for structural integrity of the walls). • Infill: 15% Gyroid (Best for omnidirectional load bearing). • Supports: None.