fanart of the fashionably funky Gwen Stacey from Marvel Spiderman - Set of bookmarks
3rd set - to print use:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Bambu Labs Matte Charcoal (11101) Transmission Distance: 1.5 #56b7e6 PLA Bambu Labs Matte Sky Blue (11603) Transmission Distance: 2 #ec008c PLA Bambu Labs Basic Magenta (10202) Transmission Distance: 4.6 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Charcoal (11101) At layer #12 (1.04mm) swap to Sky Blue (11603) At layer #16 (1.36mm) swap to Magenta (10202) At layer #20 (1.68mm) swap to Beige (10201) for the rest.
























