Say hello to the most bodacious dragon to ever fly out of the 80s

This fabulous friend is rocking: 💫Big hair ⭐ Star-studded vibes 🧦 Cozy leg warmers for peak retro energy

And because no 80s setup is complete without it… This little dragon comes with its very own retro TV box to display your dragon in true throwback style

*100% box holds 100% dragon plus one TV clicker or 2 TV Clickers

The TV "drawer, antenna, and base bottom require supports; they are set in the 3MF.

*Some assembly with the TV is required. Knobs, Antenna, Speaker Cover, Base, and Feet will need to be glued. I used super glue; use what you prefer.

*There is a wonderful 7-color 3MF from Dragonfire for the little dragon.

This blank TV Screen is the ONLY piece, other than the blank TV clicker cap, that I will allow customization on. Please remember: if you choose to customize it, you must have the proper rights to any images or designs you use.

Join the Discord; it is my main source of communication and the easiest way to provide help when needed.

PLEASE READ: All Rebel Alicorn Designs are protected under copyright. This purchase is for personal use only. Digital files may not be shared, resold, remixed, or redistributed in any form. Selling physical prints is not permitted without authorization. To sell PHYSICAL PRINTS, you must join the Merchant Tier on Patreon, Thangs, or MMF Tribe. Merchant members receive exclusive designs and discounts on past files.

Printing Recommendations: Initial layer and initial fill: 25 mm/s Layer Height: 0.20 mm Walls: 3 Infill: 15%

Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard; not recommended for children under the age of 5.