nting settings 🖨️ FDM Printing Recommendations

This model prints easily on most FDM printers.

Suggested settings:

Layer height: 0.12 – 0.20 mm Infill: 10–15% Supports: Minimal supports (for horns if needed) Material: PLA recommended Print speed: 40–60 mm/s

A smaller layer height will capture the scale details best.

🧪 Resin Printing Recommendations

Resin printing produces extremely crisp scale detail.

Suggested settings:

Layer height: 0.03 – 0.05 mm Supports: Light supports under horns and chin Orientation: Tilt 30–45