This Week’s Drop: Ochre Jellies🟡🦴

I needed some Ochre Jellies for Chapter Four of the Lost Mines campaign I’m building, so I made these two.

I also included single-color versions for anyone who prefers a simpler print. They don’t include all the trapped gear, but they keep the same oozy shape and vibe.

Print Details

• Easy to print
• Support-free design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Note: Use the feature tree to change the colors. Not the paint tool!

Includes: 2x2 Ochre Jellies

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Size & Print Settings 100% Scale (40mm miniature): 40x34x32 mm

• Recommended nozzle: 0.4mm (standard)
• Recommended layer height: 0.12 mm

75% Scale (32mm miniature): 30x25x24 mm 66% Scale (28mm miniature): 26x22x21 mm

• Recommended nozzle: 0.2mm
• Recommended layer height: 0.08 mm (or smaller)

I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you know what you’re doing and have a smaller nozzle, you can absolutely scale smaller.

This product is not affiliated with, endorsed, or approved by Wizards of the Coast.