It's really not as hard as it sounds 😅

Materials Needed:

PVC Panels (1/2" thick)

2 × 609.6 × 231 mm side panels 1 × 609.6 × 185 mm back panel 1 × 127 × 185 mm substrate barrier 1 × 195 × 175 mm bottom panel

Doors (optional, 1/8" thick)

2 × 475.1 × 92.5 mm doors (any material)

Assembly Instructions:

Slide the 5 PVC panels into the slots on the bottom panel. The bottom panel is easy to identify because it has no track. Attach the sliding track (small and long piece) to the substrate barrier. Place the top panel on the assembly. Install the sliding doors: Push the first door into the back door track on the top panel until it hits the top. Maneuver it into the bottom track. Repeat for the second door. Seal with silicone if needed for extra stability.