Fan Art cut out hueforge design of Sally from Nightmare Before Christmas
2nd model - makes sure to also check out the Jack cut out.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23909mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #5b6579 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Grey (10602) At layer #12 (1.04mm) swap to Beige (10201) At layer #18 (1.52mm) swap to Jade White (10100) for the rest.

























