Fan Art Hueforge Designed Bookmarks of the Comic Character Spawn
a couple sets to share tonight.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #545454 PLA Bambu Labs Basic Dark Gray (10105) Transmission Distance: 1.4 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Gray (10105) At layer #11 (0.96mm) swap to Red (10200) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.
























