The design is easy to print. I designed it only for PETG, printing with ABS or ASA may affect the fit of the parts.

The cup holder goes freely under the air regulator, only when the regulator itself is in the open position. Sometimes there are subtle problems with pulling the holder out, due to the more complicated design of the holder itself. In this aspect, a little patience is useful :).

The front of the cup holder as well as the drooping drink coasters are assembled through a piece of filament, you just need to insert it when the parts are connected.

Assembly is also simple. First you need to insert the cup holder into the grille adapter, then both grilles are mounted in the console, and finally attach the front of the holders to both parts.

The material needed is about 130g PETG, depending on the filling, in my case 15% is fine.

!UPDATE! I changed the holder so that it fits into one of the air intake grilles. I am leaving both versions to choose from.