You are invited to join Zoodada Discord community for more support and help!

Unlike most of models on the market, all Zoodada models are high quality designed with: No AMS (multi-color printing), No Supports, and No Glue required. Simply print and assemble just like Lego pieces. Most importantly, eyes can be swapped easily!

Included in the File:

• Bambu 3MF file (Other slicers can load but might miss some printing setting)
• All STL files
• Assembly Guide
• You may download more eyes emoji on my main page here

Instructions:

• Layer height: 0.20mm is sufficient (you may go down to 0.12mm for the best quality but with significantly more printing time)
• Infill: 5% is sufficient (up to 10% if needed; higher is unnecessary)
• Brim: Add if needed (smaller pieces or if your bed plate often has adhesion issues)
• Any infill patterns work, I usually use Rectilinear or Gyroid
• Wall generator: Arachne
• First layer in 3D printing is very important. Highly recommend to slow down your first layer speed by 50% to avoid printing issue
• Please note that every printer and filament could be different, if any parts are too loose just glue them.

Product Info:

• Height: 5.2 inches/132 mm
• Width: 4.56 inches/116 mm (Note: you can't scale this to be smaller because tolerance would be different. If you would like a smaller one, it's available on the main page)

This is a "mix and match" design that means you can decide what colors you want to print out to customize your own look!