This Week’s Drop: Zombies 🧟‍♂️🧟‍♂️🧟‍♂️

Three zombies, all in different stages of falling apart: one still walking with a sword stuck in his skull, one in a straightjacket with his brains fully exposed, and of course a crawler dragging himself forward with one foot missing.

Print Details

• Easy to print
• Support-free design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Includes: 3 Zombies

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Size & Print Settings: 100% Scale (40mm miniature): 31x29x55 mm

• Recommended nozzle: 0.4mm (standard)
• Recommended layer height: 0.12 mm

75% Scale (32mm miniature): 24x22x41 mm 66% Scale (28mm miniature): 21x19x36 mm

• Recommended nozzle: 0.2mm
• Recommended layer height: ≤ 0.08 mm

Note: I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you know what you’re doing and have a smaller nozzle, you can absolutely scale smaller.

This product is not affiliated with, endorsed, or approved by Wizards of the Coast.