St. Patrick's Day is right around the corner, and this one was too fun not to make. The Lucky Ducks are miniature duck keychains with a little Irish flair. They hang freely on a keyring, they make great gifts, and honestly they're just really satisfying to print. We've included 3MF files in two options: a single duck and a plate of 12 for when you want to crank out a batch. Feel free to scale them up or down depending on what you're going for, but the smaller you go the more your settings will matter. For anything on the smaller end, a .2mm nozzle or resin printing is the way to go if you want to keep the detail clean. They were designed as keychains, but they work just as well as Jeep ducks, bag charms, or earrings. Use them however you like. Print settings that worked well for us: Ducks: .16mm layer height, 3 walls, 10% infill Shamrocks: .20mm layer height, 3 walls, 15% infill Happy printing and good luck out there!