Darkwing Duck is on the Case - Set of bookmarks
Some more fan art.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5e43b7 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Purple (10700) At layer #15 (1.28mm) swap to Orange (10300) At layer #22 (1.84mm) swap to Jade White (10100) for the rest.

























