Magnetic Floating Wall Display for 1/64 Diecast Cars

Elevate your diecast collection! Showcase your favorite 1/64 scale cars (Hot Wheels, Matchbox, Mini GT, etc.) with this sleek, modular, and "floating" magnetic wall display. Perfect for collectors who want a clean, modern aesthetic without bulky shelves. The hidden magnetic core keeps your cars securely attached, even upside down!

What is Included in Your Download:

High-Quality STL Files: The modular base models ready for your slicer.

Pre-Configured Bambu Studio 3MF File: Perfectly arranged on the bed and pre-sliced with the exact "pause at height" setting for a flawless print.

High-Resolution Graphic Files (PDF/PNG): Perfectly sized background graphics to complete the look.

Required Materials (To complete the build):

3D Printer and Filament (PLA recommended)

N52 Neodymium Magnets (Size: 10mm diameter x 2mm thickness) - You need 2 magnets per car displayed.

Color Printer and A4 Matte Vinyl Sticker Paper (Crucial for the best visual quality)

Strong Double-Sided Tape (For wall mounting and car magnets)

Your favorite 1/64 scale diecast cars

Printing and Assembly Instructions:

1. 3D Printing the Magnetic Base

CRITICAL: You must set a print pause at Layer 19.

When the printer stops, insert a 10x2mm magnet into the cavity.

Resume the print to perfectly seal the magnet inside the base.

(Note: If using Bambu Studio, just open the included .3mf file where this pause is already configured for you!)

2. Applying the Graphics

Print the included graphics at 100% Scale (Do NOT select "Fit to Page").

Print on Matte Vinyl Sticker Paper using your printer's best/maximum quality setting.

Cut along the lines and apply the stickers to the 3D printed bases.

3. Preparing Your Cars (Polarity Check!)

To hold your cars securely, attach a second 10x2mm magnet to the bottom of your 1/64 car using strong double-sided tape.

WARNING: Before taping the magnet to your car, test its polarity against the finished base. Ensure it ATTRACTS strongly. Keep the attracting side facing DOWN towards the base.

4. Wall Mounting

Apply strong double-sided tape to the back of the base.

IMPORTANT: Apply the tape strips VERTICALLY for maximum holding capacity. Horizontal tape reduces strength.

Membership and Access:

Instant Access: This model is available for immediate download for all active members.

Builder Tier: Perfect for personal use to upgrade your own display walls.

VIP Tier (Commercial License): Includes full commercial rights to sell physical 3D prints of this magnetic display system as long as your subscription is active.