This is an adapter plate and hooks to mount the wall mount display from The Kit Kiln directly to the Ikea Skadis Board system. No screws, no hardware, no glue and no supports! Just print and press into place. The hooks are intentionally a tight fit so that there is no wiggle after installed. Four of these adapter plates can fit on a 256mmx256mm build plate.

I am in no way affiliated with "The Kit Kiln", I am just a fan of their models and am going to be mounting them this way for my own models so I thought I should share this with everyone else so that they can use it this way as well.

I have found that printing the main plate with 15% infill with the default 2 walls seems sufficiently strong to hold up this plate but I would suggest 75% infill for the hooks as they take the brunt of the load for the wall mount.

The color really doesn't matter as these parts are never visible unless the wall mount is back lit. If that is the case, pick a color that will not show through the front plate of the TKK wall display.

If you really like this model, head over to The Kit Kiln and subscribe to his files! You won't find cleaner printing models!