🔥🍔 BBQ Grill Master Gnome STL Bundle | Chef Hat, Propane Tank & Spatula | Build-a-Gnome Add-On | 3D Print 🍔🔥

Grill Master Gnome STL | BBQ Chef Hat, Propane Tank & Spatula | Build-a-Gnome Add-On Bundle Fire up the grill and let your gnome take charge of the BBQ! This Grill Master Add-On Bundle gives your Build-a-Gnome everything needed to cook up backyard favorites in style. Perfect for summer displays, gifts, BBQ lovers, and summer market sellers. (Build-a-Gnome base required.)

This Grill Master bundle includes:

• Oversized Chef Hat (BBQ / Kitchen Chef Style)
• Propane Tank with Valve Detail
• Grill Spatula
• Left Hand to hold Spatula

Important: This listing includes STL files only for the Chef Hat, Spatula, Left Hand and Propane Tank. You must own or purchase the Build-a-Gnome Base Model to use this bundle.

[creation build-a-gnome-modular-stl-seasonal-decorative-gnome-base]

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: All base pieces are engineered to fit together easily*, making assembly simple and satisfying. This also allows you to use this base model with the add-ons without needing to reprint parts you have already made! The pieces with each add-on will fit seamlessly with the base gnome. *Minimal glue needed for some accessories for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription needed!

This Grill Master gnome add-on is perfect for summer BBQs, backyard cookouts, tailgates, grill nights, and summer displays. Pair it with your other Build-a-Gnome themes for year-round selling power and endless gnome combinations! 🔥

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. For decoration purposes only.

Fire up the grill and bring some backyard BBQ flavor to your gnome lineup—let the good times sizzle! 🔥🍔

Assembly Note Some of the accessory pieces will have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.
For most accessories for this gnome, you will be required to remove a hand or hands to place the accessory in the gnome’s hands. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion for certain small parts. Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate. Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – YES for some parts
• Support Type - TREE DEFAULT
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – AUTO – Only on small pieces or if you have adhesion issues
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 5 - 15%
• Wall Loops - 2