Twisty Pint Fidget (2 Styles)
Spread St. Patrick’s Day Cheers with these Twisty Pint Fidgets 🍻 The ‘twisty liquid’ is secured to the bottom of the pint (or mug) so you can pour or spill it again and again 🙌🏼 I designed two different pints: on with a shamrock and one without.
Instructions for 3D Printing: PLA for Twisty Insert & PLA or PETG for the pint (mug) 0.2mm Layer Height 0% Infill Supports needed on pint handle
Print Plate #1 (Twisty liquid insert): 1 color, Outer wall & Inner wall Width 0.6mm, Arachne Wall Generator, 0& Infill, Outer Wall speed 50mm/s & Inner Wall Speed 100mm/s Print Plate #2 (Pint_plain): 1 color, Arachne Wall Generator, 0% Infill for pint, 25% infill for screw & clover key, Outer Wall speed 50mm/s & Inner Wall Speed 100mm/s Print Plate #3 (Pint_with Shamrock): 1 color, Arachne Wall Generator, 0% Infill for pint, 25% infill for screw & clover key, Outer Wall speed 50mm/s & Inner Wall Speed 100mm/s
Assembly: Insert the twisty liquid insert into the pint so that the screw hole is at the bottom of the pint (will fit into corresponding shape). Insert the screw and tighten with the Clover Ke.
Have fun printing! 🍀 Erin
Twisty Pint Fidget (2 Styles)
Cupcake & LED Candle Set (with Cupcake Stand and Magnetic Match)
Spill the Tea Fidget
Football Layered Fidget
Potted Flowers and Watering Can
Flower Stand for Potted Flowers with Watering Can
Pixel Flower Fidget (2 sizes) with Stems, & Vases (3 styles)
.JPG&w=3840&q=75)
Fidget Fabric Fried Egg Set (play or coaster set)
Clicky Phone Fidget (2-in-1 Fidget)
Fry Pan, Spatula and Fork
Green Eggs (requires mesh fabric), Slinky Ham and Plate
Number & Symbol Big Beads (for Horizontal and Vertical Stringing)
Big Letter Beads
Slinky (2 sizes)
Pear Spinner Fidget
.JPG&w=3840&q=75)
Carrot Garden (2 sizes)
.JPG&w=3840&q=75)
Planter Box and Dirt Bed for All Veggie Fidget Garden (2 Styles)
.JPG&w=3840&q=75)
Bouncy Broccoli Fidget + Garden
.JPG&w=3840&q=75)
Corn on the Cob Fidget + Garden
.JPG&w=3840&q=75)
Rotating Radish Fidget + Garden
love it! would be cute as a coffee mug or in a soda/rootbeer mug so kids can play with one too ;)
Great idea a small series of common drinks for kids. Coffee, tea, orange juice, milk? Whatever works
This model has way too tight tolerances. A problem that I do not have with any other print that uses this system. If you want to print it you probably need to scale it up to 150% at least. Right now it has been a waste of filament. EDIT: I did manage to get it free and used a lot of oil. Now it seems to work.
I bought this model. Thank you. I am looking for the st. Patricks days game with the rainbow in it that you advertise on Insta and TicTok. Where can I find it? I cannot find it in your models. Because I would also buy that. Will be fun to do with the kids.
No just the one with the screw hole is fixed, you need to wiggle it until it is free, I had the same issue with silk I printed in copper silk, looks amazing but got stuck so needed manual labor :D However the yellow PLA I printed worked, needed a little manpower but no issues. @Erin, do you reckon it needs more tolerance? or is it the usual depending on filaments as all change 0.01 one way or another.
I don't know if I did something wrong on mine, but it does not extend out as far as yours is pictured and are bundled in sets of 3
Will it scale?
I'm so gonna print this in a nice coloured translucent filament or two!
I love this!!
Love it