🛠️ Professional EDF System: High-Thrust Modular Design Tenth Type EMV EDFs.

👑 THE MONSTERS: 138mm & 150mm Extreme Thrust EDF The Crown Jewels of the Fleet. These are the largest, most powerful 3D-printable EDFs available. Designed for massive scale projects, heavy-lift drones, and experimental aerospace prototypes.

🛠️ EXTREME ENGINEERING FOR MASSIVE POWER: When you move to a 138 mm diameter, physics changes. The centrifugal force is immense. These fans feature my Ultra-Reinforced Shell-Lock Stator, specifically redesigned to withstand the brutal torque of high-voltage brushless systems (12S, 14S and beyond).

🌟 ELITE FEATURES:

Ultra-Reinforced Stator Housing: Massive structural vanes to ensure zero-flex under maximum load.

The "Industrial" Shell-Lock: A heavy-duty version of my split-stator design for easy mounting of large-diameter motors.

Aerodynamic Mastery: Optimized blade geometry to convert every watt of power into pure, laminar thrust.

Deep "Subsonic" Roar: At this scale, the sound is no longer a whistle—it’s a deep, terrifying turbine roar. 🔊🌪️

⚠️ CRITICAL SAFETY ADVISORY - MAXIMUM ENERGY LEVEL This is NOT a toy. This is an industrial-grade propulsion component.

Steel Pin Lock (NON-NEGOTIABLE): You MUST cross-drill the motor shaft (2mm to 2.5mm). A simple grub screw will fail. Use a high-tensile steel pin. 🔩

Mandatory Professional Balancing: A 138 mm rotor at full RPM carries the energy of a projectile. Dynamic balancing is a matter of life and death. ⚖️🚨

Advanced Materials Only: Use ONLY premium Carbon Fiber Nylon (PA-CF) or industrial-grade composites. PLA/PETG will fail.

📦 THE MONSTER PACKAGE:

Heavy-Duty Shroud: Optimized for massive Outrunner/Inrunner cooling.

Complete Rotor Set: 5, 7, 9, and 11-blade versions.

Large Shaft Hubs: Specialized designs for 8mm, 10mm, and 12mm shafts.

Surface Armor: Apply a thin layer of High-Grade Cyanoacrylate (CA) or epoxy resin to the rotor surfaces for maximum skin rigidity before balancing. 🛡️✨

Note: Drawed photo are similar for all edfs! So, except for 73 mm, here you can find the sames for all (from 83 to 138. Only 150 mm has originals rendering photos). I had made photos only for edf 73 printed, right now.

SAFETY INFORMATIONS:

WARNING!!

This object may cause seriously eyes injury without experience and balancing knowdlege! It's strickly avoid for beginners. Rotors run at high rpm and only experienced modellist must use it.

3D printing settings 🔧 ELITE 3D PRINTING SETTINGS (MAX STRENGTH):

Nozzle: 0.4 mm or 0.6 mm.

Perimeters: 9-10 perimeters (Maximum wall thickness for structural safety).

Infill: 50% - 60% Gyroid.

Speed: Max 30 mm/sec (Slow speed ensures perfect layer fusion).

Cooling: NO cooling. Heat is your friend for layer strength.