Michael M
BooneCo3d1.6K followers
Follow
BooneCo3d
BooneCo3d
|
Image 1 of 5
fanart bookmarks of Pokemon Staple Pikachu!  3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
fanart bookmarks of Pokemon Staple Pikachu!  3d model
fanart bookmarks of Pokemon Staple Pikachu!  3d model
fanart bookmarks of Pokemon Staple Pikachu!  3d model
fanart bookmarks of Pokemon Staple Pikachu!  3d model
fanart bookmarks of Pokemon Staple Pikachu!  3d model
fanart bookmarks of Pokemon Staple Pikachu!  3d model

fanart bookmarks of Pokemon Staple Pikachu!

Subscribe for access starting at $10 USD
Get access to this model and 825+ more

final set tonight:

For these models-

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #fec600 PLA Bambu Labs Basic Sunflower Yellow (10402) Transmission Distance: 4.8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red (10200) At layer #15 (1.28mm) swap to Sunflower Yellow (10402) At layer #22 (1.84mm) swap to Jade White (10100) for the rest.


Discussions

fanart bookmarks of Pokemon Staple Pikachu!

9 downloads · 3 months ago in  and 
Michael M
BooneCo3d1.6K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 825+ more

More models