Final model tonight

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.5x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.15815mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #0a2989 PLA Bambu Labs Basic Blue (10601) Transmission Distance: 4 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #f4ee2a PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue (10601) At layer #12 (1.04mm) swap to Orange (10300) At layer #15 (1.28mm) swap to Yellow (10400) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.