White Tiger among the roses - Hueforge art
2nd model tonight -- for this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.54x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #9d2235 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 #f5547c PLA Bambu Labs Basic Hot Pink (10204) Transmission Distance: 4.5 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Maroon Red (10205) At layer #12 (1.04mm) swap to Hot Pink (10204) At layer #14 (1.2mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.






















