- Follow us on Instagram (sektor7_studios_3d)

A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

- You can also join us on Patreon

NAPKIN HOLDER - EASTER BUNNY EDITION ✨🐰

Easter is all about gathering with family, sharing good food, and creating beautiful moments around the table. With our Bunny Napkin Holder, you can add a subtle yet playful Easter touch to your setup – simple, modern, and print-friendly.

✨ Clean & Functional Design

• Minimal bunny silhouette with elegant ear details
• Flat bottom surface for stable holding
• Lightweight yet sturdy structure
• Easy to print – no complicated supports needed

The flat base ensures the napkin holder stands securely on any table surface, whether you're setting up a rustic wooden table or a modern dining space.

🎨 Looks Great in Different Colors

From warm wood-like tones to soft pastel shades – this design adapts beautifully to your filament choice.

• Perfect for PLA Matte
• Great with wood-filled filaments
• Stunning in light marble or stone effects
• Also works beautifully in classic Easter pastels

You can match it to your table decor or create a playful color mix for each guest.

🍽️ The Perfect Easter Table Detail

Whether you're hosting a cozy brunch or a full Easter dinner, these bunny holders instantly elevate your table setting.

Pair them with:

• Soft yellow or cream napkins
• Natural wood tables
• Fresh greenery or spring flowers
• White plates for a clean contrast

Small detail – big seasonal impact.

Perfect for last-minute prints and easy gifting!

Happy printing 🐣

EASTER COLLECTION: https://than.gs/c/148958

3MF-FILE ATTACHED WITH ALL THE SETTINGS!

RECOMMENDED PRINT SETTINGS:

• Filament: Bambulab PLA Matte brown (used in our makes)
• Infill: 8% Gyroid or Grid
• Layer Height: 0,2mm
• Walls: 2
• Nozzle Size: 0.4mm
• Support Structure: none Needed
• Brim: None needed, but when you have adhesion problems than activate the brim

OPTIONAL REALISTIC SURFACE SETTING (OUTER CONTOUR & HOLE) (We used it in our design, but it's not a must.) --> .3mf attached

Here’s a proven setup (Bambu Studio):

• Fuzzy Skin: None (allow paint)
• Fuzzy skin point distance: 0.50 mm
• Fuzzy skin thickness: 0.1 mm or 0.2mm

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios

Greetings

Leon from Sektor 7 Studios