Vestiges of the Gray Wizard - Gandolf the Grey - Set of bookmarks
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5b6579 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Blue Grey (10602) At layer #13 (1.12mm) swap to Orange (10300) At layer #17 (1.44mm) swap to Jade White (10100) for the rest.
























