Fanart blueprint of Transformer Soundwave and his different modes - Hueforge art
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #5b6579 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Grey (10602) At layer #15 (1.28mm) swap to Cyan (10603) At layer #20 (1.68mm) swap to Jade White (10100) for the rest.






















