Fanart design of Transformers Leader Optimus Prime - Wall art with hueforge
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.54x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #0056b8 PLA Bambu Labs Basic Cobalt Blue (10604) Transmission Distance: 0.5 #9d2235 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #6 (0.56mm) swap to Cobalt Blue (10604) At layer #8 (0.72mm) swap to Black (10101) At layer #13 (1.12mm) swap to Maroon Red (10205) At layer #16 (1.36mm) swap to Jade White (10100) for the rest.






















