Lighthouse Sun Catcher 🌊✨ Capture the peaceful spirit of the coast with this lighthouse sun catcher. Featuring a lighthouse surrounded by rolling waves, drifting clouds, and two birds in flight, this design reflects sunlight in a shimmering display that brings a sense of calm, freedom, and seaside charm to any space.

If you are interested in obtaining the rights to sell commercially, please join our commercial tier!

For best results, we suggest the following settings: Initial layer speed: 25 mm/s Initial layer infill speed: 50 mm/s Walls: 2 walls are sufficient Infill: 10% Plates: Clean, washed rainbow build plates are recommended (Textured plates work well too — etched plates add extra sparkle to the finished piece) For outdoors or hot climates I recommend using PETG.

What You’ll Need To assemble your sun catcher, you’ll need: Glue: Standard super glue or E6000 2 CDs or DVDs (repurposed or new) Vinyl cut to shape may also work Charms to hang from the sun catcher (Crystals are recommended for maximum light-catching) String or chain for hanging

Assembly Notes CDs/DVDs are placed inside the print with the bottom of the CD/DVD facing outwards. Glue the rim along the inside of the print to secure them together. Make sure all surfaces are clean and dry before gluing. Allow glue to fully cure before hanging. Add your string/chain and charms.

Printable Disc and SVG cut file to use instead of a CD: https://thangs.com/designer/Noodle%20Pop%203D/3d-model/Sun%20Catcher%20Disc%20%26%20Vinyl%20Insert%20SVG-1508721