Issued under authority of the Scribe‑Engineers, this wall‑mounted chronometric unit represents a sanctioned fusion of pre‑War craftsmanship and Brotherhood refinement. The central dial is encased within a reinforced circular housing, its perimeter shaped in the likeness of a rotary cutting wheel — a reminder of the industry that forged the Old World and the discipline required to preserve what remains.

Roman indices and precision‑cut gearwork motifs adorn the face, honoring the mechanical lineage from which all true technology descends. The hands are forged in the classical style, balanced for accuracy and resistant to drift even under field vibration.

Suspended beneath the primary housing is the Sword of the Brotherhood, rendered here as a functional pendulum assembly. The hilt, weighted and calibrated, maintains a steady oscillation that regulates the internal mechanism. Its motion is not ornamental; it is a living symbol of our doctrine — strength in motion, purpose in every cycle.

Each swing marks the passage of time as the Brotherhood understands it: measured, disciplined, and unbroken.

Approved for installation in command posts, Scribe archives, and quarters of ranking Knights. Unauthorized replication or modification is strictly prohibited.

3D printing settings:

Resolution: 0.16mm to 0.2mm Infill: 20% - Gyroid Support: Yes, Tree/Organic Brim: Yes, 5mm Skirt: optional, 5 loops Color Change by Layer Height or Multi-color print

Materials:

Overture Space Grey PETG SUNLU Basic Grey PETG Giant Arm Silk Silver PETG Overture Black PETG-GF or Standard Black

Mechanism:

TIKROUND Original Youngtown 12888 Pendulum Clock Movement with 3 Sets of Hands 17mm (43/64 Inch) Shaft Length 9.5mm (3/8 Inch) Thread Length.

https://www.amazon.com/dp/B09MVNHGH2?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Instruction:

1. Print parts.

2. Remove supports from back of clock face.

3. Attach Clock Mechanism with the wall mount part that came with the mechanism (mechanism must have a 9.5mm shaft)

4. Hold clock face down and then place the Pendulum Connector into the pendulum swing on the clock mechanism and hold it in place with your finger against the pendulum swing and then insert the Pendulum part through the slot in the clock face and into the slot of the pendulum connector. Glue may be needed. Make sure that the pendulum is facing the same direction as the clock face before securing with glue.

5. Glue the Wall Spacer part to the bottom of the back of the clock face (the winged portion) with the widest side against the back of the clock face. This is to space the clock away from the wall it is hanging on so it doesn't interfere with the pendulum swinging.

6. Attach clock hands starting with the hour hand, then the minute hand, and finally the seconds hand.

7. Insert AA battery and set clock time using dial wheel on back of the clock mechanism.

8. Hang on a wall and enjoy.