Rose designs shared as bookmarks -valentines gift idea
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#002914 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2.1 #9d2235 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 #f55a74 PLA Bambu Labs Basic Pink (10203) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Green (10500) At layer #10 (0.88mm) swap to Maroon Red (10205) At layer #13 (1.12mm) swap to Pink (10203) At layer #18 (1.52mm) swap to Jade White (10100) for the rest.


























