~Better Together Series 💘 The Better Together series keeps growing with this adorable duo of love-struck piggies 🐷💖

All animals in the collection are fully compatible and can be mixed & matched freely. Magnets are optional, but highly recommended for the wow effect, watch the two halves magically attract and snap together ✨🧲

~🧲 Magnets (optional but recommended)

• Magnets are optional… but highly recommended for the full wow effect 💖
• Inside the 3MF files you’ll find pre-made magnet slots (we used round D8×2 mm magnets).
• Pause for magnet insertion: layer 27 when printing at 0.16 mm layer height (already set in the 3MFs) or 4.36 mm absolute height
• Using a different magnet size? No problem! Resize the slots directly in your slicer (we recommend +0.5 mm tolerance compared to the magnet size).

~🔑 Keychain (optional)

• Available with or without the keychain hole
• We used 2.4 mm ringball keychains, easy to find and very common
• Also compatible with standard classic keyrings (≈8 mm diameter)

General recommendations ⚠️

• Before diving into the multi-color print, we highly recommend starting with a single-color test print to ensure everything works as expected.
• For multi-color prints, we suggest filling the bed to minimize PLA waste from color changes.

Files available 📂

• Optimized 3MF files for BambuLab, Creality, Anycubic and Elegoo for an effortless print experience!
• STL files for all printers

We believe in true love, especially when it's 3d printed❤️✨

Commercial License 💰 Do you want to sell prints of our models? You can purchase commercial licensing by joining the Commercial License in our Patreon, Thangs3D or MyMiniFactory and unlock the opportunity to share this design with your customers!

Cheers, Valeria & Mattia