Sketches of the midnight walkers - Vampires - Set of Bookmarks
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #9d2235 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Maroon Red (10205) At layer #13 (1.12mm) swap to Beige (10201) At layer #20 (1.68mm) swap to Jade White (10100) for the rest.
























