- Follow us on Instagram (sektor7_studios_3d)

A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

- You can also join us on Patreon

ROSE BUDDY ARTICULATED (PLEASE NOTE: THE MODEL IS AVAILABLE FOR FREE DOWNLOAD, BUT COMMERCIAL USE IS ONLY POSSIBLE THROUGH ONE OF OUR MEMBERSHIPS!)

Today we would like to introduce you to our timeless Easter tea light. The tea light is placed in the egg. The egg and the abstract bunny can be placed on a discreet base.

For the Bunny and the Base we used Fuzzy Skin

If you like it, don’t forget to ❤️ the model and share your makes!

CLICK & PRINT FOR BAMBULAB USERS: https://makerworld.com/en/models/1274036-egg-tealight-easterdecoration-bunny

3MF-FILE ATTACHED WITH ALL THE SETTINGS!

RECOMMENDED PRINT SETTINGS:

• Filament: Bambulab PLA Matte brown (used in our makes)
• Infill: 8% Gyroid or Grid
• Layer Height: 0.2 or 0.16mm
• Walls: 2
• Nozzle Size: 0.4mm
• Support Structure: Needed
• Brim: None needed, but when you have adhesion problems than activate the brim
• Skirt loops: 1

REALISTIC SURFACE SETTING (OUTTER CONTOUR OF THE LETTERING) (We used it in our design, but it's not a must.)

Here’s a proven setup (Bambu Studio):

• Fuzzy Skin: Contour
• Fuzzy skin point distance: 0.50 mm
• Fuzzy skin thickness: 0.3 mm

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios

Greetings

Leon from Sektor 7 Studios