3rd set tonight is for Valentine's day.

FOr these models:

rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.95746mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #7 (0.64mm) swap to Cyan (10603) At layer #12 (1.04mm) swap to Jade White (10100) At layer #17 (1.44mm) swap to Red (10200) for the rest.