Unicorn Plushie Prints in 3 pieces. Once printed, press the peg into the head (make sure the concaved part of the peg is facing the notch inside the head) then press the other end of the peg into the neck. The peg can be scaled up or down slightly to adjust the fit if need be. The peg also has a glue in option.

The tail has a small support in the joint to help with printing. Rotate the tail to free it. There are also 2 size options for scaling it larger or smaller, make sure to choose the correct file so that the support works correctly.

Comes with painted .3MF files for multicolor printing.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!