Crowly

This adorable little halloween crow plushie prints in a few pieces that will need to be glued into place. The peg (print 2) helps keep the pieces in place while gluing together.

Also has a magnet version that uses a 10x2mm magnet. It will need to be glued in place.

Recommended that the articulated version is printed at 100% or larger and the magnet version at 100%.

A painted .3MF file is included. But you can change up the paint however you'd like! The magnet on the painted file is added as a negative part which can be moved around as needed.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!