This little Chihuahua prints in 2 pieces and has 2 head options. The head just needs to be gently pressed onto the neck ball joint once printed.

It also has two scaling versions; one for scaling up and one for scaling down, so make sure you grab the correct one depending on what size you wish to print it at. Has been tested down to 75%.

Also includes painted 3mf files!

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!