Bartman to the Rescue! - Cutout Wall art of Bart Simpson - Hueforge
Something a bit different tonight. Working on other items but made this one to share. It is a cutout of the Simspons character Bart.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #5e43b7 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #ff9016 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 #f4ee2a PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 6 unique filaments
Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Purple (10700) At layer #15 (1.28mm) swap to Red (10200) At layer #18 (1.52mm) swap to Pumpkin Orange (10301) At layer #21 (1.76mm) swap to Yellow (10400) At layer #23 (1.92mm) swap to White for the rest.























