(Welcome Pack)

• His eyes are swappable. Grab different eyes on main page.
• Tail is 90 degree rotatable
• Arms are also rotatable

Files include:

• Bambu Slicer 3MF File (Other slicers can load but might miss some printing setting)
• All STL files
• Assembly Guide with Printing Instruction

Filament I use:

• PolyTerra Matte PLA Yellow/Black/White/Red (Matte PLA is recommended for best aesthetics)

Printing:

• Layer height: 0.20mm is sufficient (you may go down to 0.12mm for the best quality but with significantly more printing time)
• Infill: 5% is sufficient (up to 10% if needed; higher is unnecessary)
• Brim: Add if needed (smaller pieces or if your bed plate often has adhesion issues)
• Any infill patterns work, I usually use Rectilinear or Gyroid
• Wall generator: Arachne
• Please do not split the body part

Let me know if you run into any issues!