BTTF Hoverboard Fan Art Replica

Here is the Back to the Future Hoverboard inspired fan art replica. As many of you know ive been working on this for a while and im not there with the hover version, is super finicky and will take time, so in the mean time im releasing the non hover screen accurate version. Ive done my best to make this as accurate as possible with lots of detail. This is a multi colour print but i have made it so there is no more than 3 colours per part. Maybe one day I'll split it further but for now this is it. This with a h2c or similar will enjoy zero waste. There is a lot of parts and does require glue, Here's a diagram of part names and placement So you have part number, followed by first letter of the colour, then its either T or B for top or bottom. Single parts are named as their part. Hopefully this makes sense.

The Board is split into 3 sections and does fit a 256x256x256 build plate. The 3 sections fit together with square biscuits and require glue. Ive set the infill to 5% as its pretty strong anyway with all the colour swaps.

Here a list of filaments used

1. bambu basic white
2. Bambu basic magenta (main Pink)
3. Bambu basic Yellow
4. bambu basic green 5, bambu matte dark red (pattern backing)
5. Sunlu Magenta (pattern detail)
6. bambu basic mistletoe green
7. bambu basic maroon red
8. bambu basic black
9. bambu basic silver

I have checked and double checked colouring and im hoping there is no errors, but feel free to give the colouring a once over before printing. The model is made up of 100's if not 1000's of separate parts and is easily colourable using the paint fill and edge detection set to 90.

enjoy the Build.