Firey Dragon's head rising from her lair - Hueforge art
Final model this evening. Uses 6 colors. if only able to use 4 can drop the drk blue and the beige.
For this model:
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #042f56 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #f55a74 PLA Bambu Labs Basic Pink (10203) Transmission Distance: 8 #ff9016 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 6 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Blue (11602) At layer #9 (0.8mm) swap to Cyan (10603) At layer #13 (1.12mm) swap to Pink (10203) At layer #17 (1.44mm) swap to Pumpkin Orange (10301) At layer #22 (1.84mm) swap to Beige (10201) for the rest.






















