- Follow us on Instagram (sektor7_studios_3d)

A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

- You can also join us on Patreon

PLANTER TRIO WITH OPTIONAL INLET

Hello everyone :)

We would finally like to introduce you to our "PLANTER TRIO". The planters are very easy to print and have a very beautiful and elegant design. The planters fit easily into any decoration.

The planter features a clever inlet design. This raises the inlet slightly so that the plant does not "float in water" later on. It also prevents twisting. The inlets then have a fixed position.

NO SUPPORTS NEEDED!

DIMENSIONS

• INNER DIAMETER: 124MM
• INNER HEIGHT: 98MM

If you like the model, a ❤️, comment, or make on Thangs would mean a lot. Happy printing!

3MF-FILE ATTACHED WITH ALL THE SETTINGS!

RECOMMENDED PRINT SETTINGS:

• Filament: Bambulab PLA Matte black, white (used in our makes)
• Infill: 6% Gyroid or Grid
• Layer Height: 0.2mm
• Walls: 2
• Nozzle Size: 0.4mm
• Support Structure: none needed
• Brim: None needed, but when you have adhesion problems than activate the brim

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios

Greetings

Leon from Sektor 7 Studios