designs of the steampunk world - animal hybrids on display - set of bookmarks
a couple bookmark designs this evening.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 62.72x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm
#002914 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2.1 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #7d6556 PLA Bambu Labs Matte Dark Brown (11801) Transmission Distance: 2 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Green (10500) At layer #9 (0.8mm) swap to Cyan (10603) At layer #13 (1.12mm) swap to Dark Brown (11801) At layer #19 (1.6mm) swap to Beige (10201) for the rest.
























