Billy Bookcase Anti‑Tip Base (IKEA Billy Stabilizer)

Description
Oldie-But-Goodie. This 3D‑printed stabilizer base is designed to help prevent the IKEA Billy bookcase from tipping forward. It adds subtle forward lift and stability, especially useful on carpet, uneven floors, or when the bookcase is lightly loaded at the top.

Features

simple print‑ready geometry fits standard IKEA Billy dimensions improves stability without screws or adhesives works alongside wall anchors for extra safety 1 hour > 150 mm/s 2 hours > 100 mm/s 100 gr 100% infill (both parts)

Print Settings

Material: PLA or PETG Nozzle: 0.6 Infill: 100% Layer height: 0.3 mm Supports: not required 4 walls

Installation

Print bases Place one under each front corner of the Billy Slide the bookcase back until it rests securely Combine with wall anchoring for maximum safety

Notes

Designed for the standard Billy width May also fit similar flat‑bottomed furniture Feel free to remix or adapt