On a fidget fun scale of 0-10, these Twisty Fidget Eggs might just be a 10 🤩 They’re super smooth and satisfying. Hard to put down but also sometimes hard to hold on to 🥚😂

Dimensions of Twisty Fidget Egg (large): approx. 3 in. x 2 ½ in. Dimensions of Twisty Fidget Egg (small): approx. 2 ¼ in. x 1 ¾ in.

How to Print:

• Basic PLA works great (you can also use PLA Silk or PLA Matte but I recommend you reduce the outer wall speed to 50mm/s & inner wall speed to 100mm/s)

• 0.20mm Layer Height

• Infill 0%

• No Supports

I have including the following 3mf Project File: Print Plate #1 Twisty Egg_large (settings for Basic PLA): one color, Arachne wall generator selected, 0% Infill

Print Plate #2 Twisty Egg_large (settings for Silk PLA or Matte PLA): one color, Arachne wall generator selected, 0% Infill, Out Wall Speed 50 mm/s & Inner Wall Speed 100 mm/s

Print Plate #3 Twisty Egg_small (settings for Basic PLA): one color, Arachne wall generator selected, 0% Infill

Print Plate #4 Twisty Egg_small (settings for PLA Silk or Matte PLA): one color, Arachne wall generator selected, 0% Infill, Out Wall Speed 50 mm/s & Inner Wall Speed 100 mm/s

Please note: The Twisty Egg on Print Plate #1 and #2 are the same - but plate #1 has settings for printing the Egg in Basic PLA and plate #2 has settings set for printing the Egg in Silk PLA or Matte PLA.

Same thing for the smaller egg size - the small egg on Plate #3 and #4 are the same - but plate #3 has settings for printing it in Basic PLA and Plate #4 has settings for printing it in Silk or Matte PLA.

I slowed down the wall speeds for the Silk and Matte PLA’s for a smoother finish and better articulation/movement:)

Also, ensure your print plates are clean and your filament dry for the best adhesion and print quality. You can also use a little glue on the printbed for added grip 💪

Have fun printing!! Erin