Not So XL Easter Bunny - for smaller build plates Not So... XL Easter Bunny: Assembly Guide Welcome to the Not So... XL Easter Bunny build! This specific version is designed for smaller build plates (300x300x300 mm or below) and features tolerances specifically adjusted for printing at this impressive scale. Note: This is the Standard Version. Additional upgrades, such as the long-sleeve outfit and the grass-textured base, are available as separate files.Before You Print & Assemble

• Printing Requirements: This model prints in parts and requires glue for most assembly steps. However, the chocolate egg and carrot are designed to fit into the hands without adhesive.
• Supports: Supports are necessary. I recommend setting your threshold angle to 26 to minimise cleanup. Advanced users may prefer to paint on supports only in critical areas.
• Tolerances: Every effort has been made to ensure a perfect fit. However, due to variations in printers and filaments, we highly recommend a "dry fit" (assembling without glue) before final bonding. Assembly Steps

1. The Foundation

• Base: Insert the Base-to-Foot connectors into your chosen base.
• Feet & Legs: Place the feet onto the connectors, then insert the Foot-to-Leg connectors and slide the legs into place.

2. The Body

• Waistcoat: Insert the Leg-to-Waistcoat connectors and slide the waistcoat over the legs.
• Arms & Head Prep: Insert the connectors for both arms and the two Waistcoat-to-Head connectors.
• Upper Body: Attach the head and the left and right arms. Finally, place the neck piece into the front cavity.

3. Facial Features

• Eyebrows: Attach the left and right eyebrows.
• Eyes: Assemble the eyes in this specific order:
  1. Outer Black… 2. White… 3. Blue… 4. Inner Black… 5. Reflection.
  2. Once assembled, insert them into the eye cavities.
• Nose & Teeth: Insert the nose into its cavity, then slide the teeth upward into position.

4. The Ears

• Insert the Ear Connectors into the top of the head.
• Slide on the left and right ears.
• Ear Inserts: To fit these, slide the flat end in first at an angle, then snap the top into place. Accessories
• Chocolate Egg: This container uses a twist-lock mechanism. Once assembled, it clips onto the right hand.
• Carrot: Insert the carrot top into the carrot body. This slides easily into the left hand.
• Decorative Eggs: We’ve included several small eggs to fill your basket! Congratulations! You have successfully assembled your Not So... XL Easter Bunny.

Filaments Used Bambu Basic white, black Bambu matte turquoise, pink, blue for the chocolate egg, overture chocolate. Carrot, Bambu pumpkin orange, mistletoe green