Meet the Axo-Cat! A whimsical hybrid of a kitten and an axolotl.

Note: I have provided a .3mf file with the color painting pre-set. However, you should apply the mechanical settings that work best for your setup. Here is what I suggest.

💙 Enjoying the Freebies? I love bringing these concepts to life and sharing them with you. If you'd like to support the channel or sell physical prints of my designs, check out the links below:

🔓 Commercial License: [ https://www.patreon.com/cw/Fluid_Prints ] ☕ Buy Me a Coffee: [ https://buymeacoffee.com/fluid_prints ]

Recommended Print Settings

Material: PLA Blue, Orange, and Tan). Layer Height: 0.16mm or 0.2mm. Infill: 15%. Flush Volume: Adjusted to 1.00 in the slicer for clean transitions. Supports: Required (Slim tree supports are recommended ). Tree/Organic Supports are highly recommended -On Build plate only