The stampeding horse breaking free of the flames - hueforge art
3rd piece of art this evening.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 142.83x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #9d2235 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #f4ee2a PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Maroon Red (10205) At layer #14 (1.2mm) swap to Orange (10300) At layer #19 (1.6mm) swap to Yellow (10400) for the rest.






















